******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A8 Quattro Sedan (4E2) V8-4.2L (BVJ) Technical Service Bulletin # 371268 Date: 121008

A/T Controls - MIL ON, DTC's P0605/P17EC Stored

37 Gearbox warning light on - Faults P0605 and/or P17EC stored in Selector lever module 81

37 12 68

2028561/3

October 8, 2012.

Supersedes Technical Service Bulletin Group 37 number 12 - 52 dated May 31, 2012 for reasons listed below.

Affected Vehicles

15

Condition

^ There is no customer complaint about the gearbox.

^ The gear lever display flashes.

^ The message "gearbox problem, journey can be continued with restrictions" is shown.

The entry P0605 or P17EC is logged under the diagnosis address 81- Selector lever.

Technical Background

New software in the Selector Lever Control Module (J587) addressed the condition.

Production Solution

Not applicable.

Service

Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the Selector Lever Module (81) using the SVM action code as listed in the table above if necessary.

16

Warranty

Additional Information

The following Technical Service Bulletin will be necessary to complete

this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals

for the latest information.

Attachment

17

18

19

20

21

22

23

24

25

^ TSB 2011732 00 Software Version Management (SVM), operating instructions

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 941290 Date: 121008

Body/Lighting - Side Mirror Turn Signal Inoperative

94 Side mirror turn signal inoperative

94 12 90

2030956/2

October 8, 2012.

Supersedes Technical Service Bulletin Group 94 number 12 - 88 dated September 25, 2012 for reasons listed below.

18

Affected Vehicles

Condition

The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation

can be seen behind the lens as shown in Figure 1.

Technical Background

The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror

at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.

Production Solution

Not applicable.

Service

1. Remove the side mirror as instructed by the ElsaWeb Repair manual.

Body >> Body Exterior >> 66 Exterior Equipment >> Removal and Installation >> Exterior Rearview Mirror

2. Replace the damaged turn signal lens in the side mirror.

Electrical System >> Electrical Equipment >> 94 Exterior Lights, Switches >> Removal and Installation >> Exterior Mirror Turn Signal

Lamps

3. Test turn signals.

4. Clear DTCs in electrical system.

19

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.