Showing posts with label 120215. Show all posts
Showing posts with label 120215. Show all posts

Sunday, 12 January 2020

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



263



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



264



265



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Tuesday, 22 October 2019

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



236



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



237



238



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Tuesday, 19 March 2019

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



263



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



264



265



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Thursday, 15 November 2018

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 263



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 264



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 265



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Sunday, 28 October 2018

******** Audi A6 Quattro Sedan (4F2) V6-3.0L SC (CCAA) Technical Service Bulletin # 941266 Date: 120215


Lighting - Low Beams ON When Switched To Parking Lights



94 Headlight low beams stay on when switched to parking lights



94 12 66



2028547/1



February 15, 2012.



Affected Vehicles



Condition



Low beam stays on at highway speeds with headlight switch set to parking lights.



207



-ORWhen



slowing down, approaching an intersection, or in tight turns, the low beams turn off automatically with the headlight switch set to parking



lights (with or without fog lights activated).



These are normal conditions. The headlight system functions properly during these conditions.



Technical Background



There is a normal condition where the headlight low beams will stay on even when the headlight switch is moved to the parking light position with



the vehicle moving at a speed of 19mph (30km/h) or higher. These conditions may only occur during a long trip and the headlight switch position is



changed late in the trip.



^ With the headlight switch set to the "Auto" position and with the low beams automatically activated, the low beams will stay on even when the



headlight switch is set to the parking light position if the vehicle is moving over 19mph (30 km/h). When the vehicle speed drops below



19mph (30 km/h), and with the headlight switch in the parking light position, the low beams will automatically switch off.



^ With the headlight switch set to the "low beam" position, the low beams will stay on even when the headlight switch is set to the parking light



position if the vehicle is moving over 19mph (30km/h). When the vehicle speed drops below 19mph (30 km/h), and with the headlight switch



in the parking light position, the low beams will automatically switch off.



This can be a common occurrence for those customers who enjoy driving with the vehicle's fog lights on all the time or during dusk because the



headlight switch will likely be moved from the Auto position to the parking light position.



This condition can also happen unintentionally when a customer tries to switch from the "low beam" position to the "Auto" position with the fog



lights activated (switch pulled out). The headlight switch can only be physically turned to the "parking light" position with the fog lights activated.



The headlight switch needs to be pushed back in to allow it to move from the low beam position to the Auto position.



Production Solution



Not applicable.



Service



A replacement of the headlight switch does not fix the compliant. All part replacements will be rejected under warranty for this complaint.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Saturday, 29 September 2018

******** Audi A6 Sedan (4F2) V6-3.2L (CALA) Technical Service Bulletin # 941266 Date: 120215


Lighting - Low Beams ON When Switched To Parking Lights



94 Headlight low beams stay on when switched to parking lights



94 12 66



2028547/1



February 15, 2012.



Affected Vehicles



Condition



Low beam stays on at highway speeds with headlight switch set to parking lights.



75



-ORWhen



slowing down, approaching an intersection, or in tight turns, the low beams turn off automatically with the headlight switch set to parking



lights (with or without fog lights activated).



These are normal conditions. The headlight system functions properly during these conditions.



Technical Background



There is a normal condition where the headlight low beams will stay on even when the headlight switch is moved to the parking light position with



the vehicle moving at a speed of 19mph (30km/h) or higher. These conditions may only occur during a long trip and the headlight switch position is



changed late in the trip.



^ With the headlight switch set to the "Auto" position and with the low beams automatically activated, the low beams will stay on even when the



headlight switch is set to the parking light position if the vehicle is moving over 19mph (30 km/h). When the vehicle speed drops below



19mph (30 km/h), and with the headlight switch in the parking light position, the low beams will automatically switch off.



^ With the headlight switch set to the "low beam" position, the low beams will stay on even when the headlight switch is set to the parking light



position if the vehicle is moving over 19mph (30km/h). When the vehicle speed drops below 19mph (30 km/h), and with the headlight switch



in the parking light position, the low beams will automatically switch off.



This can be a common occurrence for those customers who enjoy driving with the vehicle's fog lights on all the time or during dusk because the



headlight switch will likely be moved from the Auto position to the parking light position.



This condition can also happen unintentionally when a customer tries to switch from the "low beam" position to the "Auto" position with the fog



lights activated (switch pulled out). The headlight switch can only be physically turned to the "parking light" position with the fog lights activated.



The headlight switch needs to be pushed back in to allow it to move from the low beam position to the Auto position.



Production Solution



Not applicable.



Service



A replacement of the headlight switch does not fix the compliant. All part replacements will be rejected under warranty for this complaint.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Thursday, 30 August 2018

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215



Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



263



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



264



265



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215



Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



236



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



237



238



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215



Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



263



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



264



265



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215


Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 401222 Date: 120215



Suspension - Wheel Bearing Grind Noise When Cornering



40 Grinding noises from wheel bearings when cornering



40 12 22



2024782/2



February 15, 2012.



Supersedes Technical Service Bulletin Group 40 number 10 - 15 dated December 21, 2010 for reasons listed below.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 263



Affected Vehicles



Condition



Grinding noises coming from the front or rear of the vehicle. The noises become louder with increasing speed and when cornering.



Technical Background



Premature outer race damage.



Production Solution



Updated wheel bearings.



Service



Replace the affected wheel bearing.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 264



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 265



Warranty



All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to



review or audit by Audi Warranty.



Required Parts and Tools



Replace with part numbers found in ETKA. Only improved parts are available.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.