******** Audi A8 Quattro Sedan (4E2) V8-4.2L (BVJ) Technical Service Bulletin # 961124 Date: 111111

Campaign 96C3 - Side Assist Software Update (NVLW)

UPDATE - Side Assist Software Update (NVLW)

96 11 24

2027956/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 96 number 11 - 23 dated November 8, 2011 for reasons listed below.

Affected Vehicles

Condition

This RVU has been proactively released to prevent the following condition from occurring in the vehicle:

Side assist becomes inoperative.

This Required Vehicle Update (RVU) is in effect until removed.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 96C3 code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the New Vehicle Limited Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin.

^ Procedure must be performed on applicable vehicles in dealer inventory prior to sale.

Technical Background

For Audi A8 vehicles equipped with side assist (address 3C) and manufactured within a specific period, it is possible that the side assist may switch

itself off. DTC 02850 may be stored inside the side assist control unit and the system can no longer be activated.

Production Solution

Updated software.

Service

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

132

2. Update side assist control unit (J769) using the SVM action code as listed in the table above if necessary.

3. If DTC 02850 is set in the side assist control unit then the control unit cannot be updated and must be replaced. Replacement of the control unit

should be claimed under normal warranty and not this RVU.

133

Warranty

Additional Information

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

134

135

136

137

138

139

140

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

301

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

302

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

303

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

273

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

274

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

275

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 301

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 302

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 303

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

300

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

301

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

302

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

273

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

274

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

275

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 301

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 302

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 303

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

300

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

301

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

302

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 171125 Date: 111111

Engine - Oil Consumption High After TSB 2027731

17 Engine oil consumption too high after TSB 2027731 was performed - Repair Authorization

17 11 25

2027708/2

November 11, 2011.

Supersedes Technical Service Bulletin Group 17 number 11 - 19 dated November 2, 2011 for reasons listed below.

301

Affected Vehicles

Condition

Based on customer concern, follow the procedure below.

Technical background

In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of

engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified

break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's

Manual for specific break-in procedures.

Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the

ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation

level of the oil.

Production Solution

Not Applicable.

Service

Tip: Make sure TSB 2027731 has been completed.

Perform evaluate measurement (following consumption road test), Part 2

Tip: Ensure the VAS device is at software level (Base 19 and Brand 19.34) or higher.

1. Park vehicle on a level surface, GFF test plan will not continue if vehicle tilt is more than 0.5 degrees (side to side and front to rear).

302

2. Select: Guided Function >> 01 - Engine Electronics >> 01 - Oil consumption measurement (electronic measurement), as shown above.

3. Follow the GFF test plan, Evaluate measurement (following consumption road test) exactly and observe all notes and cautions.

4. If the vehicle is within Warranty(ies), you must obtain authorization from the Audi Technical Assistance Center before performing any repairs

based on oil consumption test results.

5. When creating a TAC ticket, in the field Concern Type, select Oil Consumption Repair Authorization, as shown above.

6. Contact Audi Technical Assistance Center (TAC) with all test results.

7. You must attach both the GFF log and the oil measurement test sheet to the TAC ticket prior to contacting a TAC consultant.

303

Warranty

Required Parts and Tools

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.