******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

427

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

428

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

429

ATTACHMENT

430

431

432

433

434

435

00 Software Version Management (SVM), Operating Instructions

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

395

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

396

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

397

398

399

400

401

402

403

00 Software Version Management (SVM), Operating Instructions

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 421

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 422

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 423

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 424

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 425

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 426

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 427

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 428

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 429

00 Software Version Management (SVM), Operating Instructions

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

421

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

422

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

423

424

425

426

427

428

429

00 Software Version Management (SVM), Operating Instructions

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571145 Date: 110216

Body/Electrical - Liftgate Power Closing Button Inop.

57 Button in rear lift gate for power closing does not function

57 11 45

2021372/5

February 16, 2011.

Supersedes Technical Service Bulletin Group 57 number 10 - 14 dated March 12, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

^ Vehicles with a power closing rear lift gate cannot close the rear lift gate automatically with a press of the button located on the rear lift gate.

^ When this condition occurs, the following two DTCs can be set with time stamps that are five seconds apart. (For example, if DTC 03250 has a

time stamp of 12:36:10, then DTC 02364 should have a time stamp of 12:36:15.)

^ DTC 03250 (Luggage Compartment Closing Assistance Motor -V382- Open/Short circuit to Ground) in the comfort system central control

module (J393).

^ DTC 02364 (Closing assistance - Incorrect Signal) in the rear lid electronics (J605).

TECHNICAL BACKGROUND

This sporadic condition is created when the comfort system central control module incorrectly detects insufficient current draw from the power

closing assist motor. As a result, the power closing assist motor is switched off while the rear lift gate automatically opens. The rear lid electronic

control module then disables the automatic closing of the rear lift gate. This also disables the closing button in the lift gate. From this point on, the

rear lift gate can be closed only manually, using a large amount of force. Once the lift gate is manually closed, the automatic opening of the lift gate

is restored. This problem can be intermittent.

PRODUCTION SOLUTION

Optimized software for the J393 comfort system central control module was put into series production.

SERVICE

A SVM software update for the comfort system central control module (J393) is available.

421

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the comfort system central control module (J393) using the SVM action code as listed in the table above if necessary.

3. The remotes must be relearned after the software update.

a. With the ignition on and the engine off, place remote into the ignition for at least 5 seconds.

b. Repeat for each additional remote, if available.

c. If the additional remotes are not available at the time of service, please instruct the customer to repeat this procedure with the additional

remotes. Otherwise, the keyless unlock and start/stop (if equipped) may not work with the unlearned remotes.

4. Once the learn procedure has been completed, turn off the ignition, disconnect the VAS Tester from the vehicle, and lock the car for a minimum

of 2 minutes to allow the vehicle systems to go to sleep.

5. Test the remote's unlocking capability from at least 20-30 ft away from the vehicle to ensure the key has been relearned to the car.

6. If the car is equipped with the Kessy system, lock the car and check all the door handle sensors to ensure they are working.

Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:

^ 2019482 57 Remote function of vehicle keys inoperative

^ 2020795 90 All 12-volt accessory outlets are inoperative

^ 2021341 96 Trunk light inoperative

422

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals

for the latest information.

ATTACHMENTS

423

424

425

426

TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

395

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

396

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

397

398

399

400

401

402

403

00 Software Version Management (SVM), Operating Instructions

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571145 Date: 110216

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571145 Date: 110216

Body/Electrical - Liftgate Power Closing Button Inop.

57 Button in rear lift gate for power closing does not function

57 11 45

2021372/5

February 16, 2011.

Supersedes Technical Service Bulletin Group 57 number 10 - 14 dated March 12, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

^ Vehicles with a power closing rear lift gate cannot close the rear lift gate automatically with a press of the button located on the rear lift gate.

^ When this condition occurs, the following two DTCs can be set with time stamps that are five seconds apart. (For example, if DTC 03250 has a

time stamp of 12:36:10, then DTC 02364 should have a time stamp of 12:36:15.)

^ DTC 03250 (Luggage Compartment Closing Assistance Motor -V382- Open/Short circuit to Ground) in the comfort system central control

module (J393).

^ DTC 02364 (Closing assistance - Incorrect Signal) in the rear lid electronics (J605).

TECHNICAL BACKGROUND

This sporadic condition is created when the comfort system central control module incorrectly detects insufficient current draw from the power

closing assist motor. As a result, the power closing assist motor is switched off while the rear lift gate automatically opens. The rear lid electronic

control module then disables the automatic closing of the rear lift gate. This also disables the closing button in the lift gate. From this point on, the

rear lift gate can be closed only manually, using a large amount of force. Once the lift gate is manually closed, the automatic opening of the lift gate

is restored. This problem can be intermittent.

PRODUCTION SOLUTION

Optimized software for the J393 comfort system central control module was put into series production.

SERVICE

A SVM software update for the comfort system central control module (J393) is available.

421

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the comfort system central control module (J393) using the SVM action code as listed in the table above if necessary.

3. The remotes must be relearned after the software update.

a. With the ignition on and the engine off, place remote into the ignition for at least 5 seconds.

b. Repeat for each additional remote, if available.

c. If the additional remotes are not available at the time of service, please instruct the customer to repeat this procedure with the additional

remotes. Otherwise, the keyless unlock and start/stop (if equipped) may not work with the unlearned remotes.

4. Once the learn procedure has been completed, turn off the ignition, disconnect the VAS Tester from the vehicle, and lock the car for a minimum

of 2 minutes to allow the vehicle systems to go to sleep.

5. Test the remote's unlocking capability from at least 20-30 ft away from the vehicle to ensure the key has been relearned to the car.

6. If the car is equipped with the Kessy system, lock the car and check all the door handle sensors to ensure they are working.

Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:

^ 2019482 57 Remote function of vehicle keys inoperative

^ 2020795 90 All 12-volt accessory outlets are inoperative

^ 2021341 96 Trunk light inoperative

422

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals

for the latest information.

ATTACHMENTS

423

424

425

426

TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

427

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

428

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

429

ATTACHMENT

430

431

432

433

434

435

00 Software Version Management (SVM), Operating Instructions

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

421

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

422

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

423

424

425

426

427

428

429

00 Software Version Management (SVM), Operating Instructions

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 441116 Date: 110216

Campaign 44I2 - Confirmation Screen Language For TPMS

RVU 4412 - TPMS Confirmation Screen Language

44 11 16

2025367/2

February 16, 2011.

Supersedes Technical Service Bulletin Group 44 number 11 - 15 dated February 15, 2011 for reasons listed below.

AFFECTED VEHICLES

CONDITION

This RVU has been proactively released to improve this condition on the vehicle:

Update the TPMS confirmation screens to be consistent across all models.

This RVU applies only to vehicles with the Non-3G MMI radio. (Applies to low-level CAN radio with controls located in instrument panel vs.

center console.)

This Required Vehicle Update (RVU) is in effect until November 20, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^ Procedure is valid only for vehicles that show the 44I2 (44i2) code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^ Vehicle must be within the Limited New Vehicle Warranty.

^ Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable

vehicles in dealer inventory prior to sale.

TECHNICAL BACKGROUND

Updated tire pressure monitoring software.

PRODUCTION SOLUTION

Updated radio software for tire pressure monitoring.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 421

2. Update the radio module, address location 56, using the SVM action code as listed in the table above if necessary.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 422

WARRANTY INFORMATION

ADDITIONAL INFORMATION

All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENT

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 423

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 424

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 425

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 426

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 427

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 428

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 429

00 Software Version Management (SVM), Operating Instructions