Showing posts with label 100325. Show all posts
Showing posts with label 100325. Show all posts

Wednesday, 18 December 2019

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 545



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Monday, 9 December 2019

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



533



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



534



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



535



536



537



538



539



540



541



Attachment - 00 Software Version Management (SVM), Operating Instructions

Saturday, 30 November 2019

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 241011 Date: 100325


Engine Controls - Hesitation On Acceleration/No DTC's



01 Light engine hesitation under acceleration at steady throttle application at 2500 rpm and 3800 rpm



24 10 11



2021227/2



March 25, 2010.



Supersedes Technical Service Bulletin Group 24 number 09-20 dated September 30, 2009 for reasons listed below.



Affected Vehicles



484



Condition



^ Light engine hesitation or shudder when accelerating in different rpm ranges.



If accelerated with steady throttle application, the changing of the load flaps can only be felt at about 2,500



rpm, and the Audi Valve Lift System shifts at about 3,800 rpm.



^ No DTCs in the engine control module.



^ Will not result in engine stall.



Technical Background



Incorrect software of the engine control module.



Production Solution



Optimized engine software from MY 2010.



Service



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



2. Update the engine control module using the SVM action code as listed in the table above if necessary.



Warranty



Required Parts and Tools



VAS Tester



485



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Monday, 21 October 2019

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



534



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



535



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



536



537



538



539



540



541



542



Attachment - 00 Software Version Management (SVM), Operating Instructions

Friday, 1 March 2019

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



510



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



511



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



512



513



514



515



516



517



518



Attachment - 00 Software Version Management (SVM), Operating Instructions

Wednesday, 6 February 2019

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



519



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Saturday, 2 February 2019

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



543



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Tuesday, 1 January 2019

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



542



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Tuesday, 4 September 2018

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 536



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 537



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 538



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 539



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 540



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 541



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 542



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 543



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 544



Attachment - 00 Software Version Management (SVM), Operating Instructions

Thursday, 30 August 2018

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 241011 Date: 100325


Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 241011 Date: 100325



Engine Controls - Hesitation On Acceleration/No DTC's



01 Light engine hesitation under acceleration at steady throttle application at 2500 rpm and 3800 rpm



24 10 11



2021227/2



March 25, 2010.



Supersedes Technical Service Bulletin Group 24 number 09-20 dated September 30, 2009 for reasons listed below.



Affected Vehicles



484



Condition



^ Light engine hesitation or shudder when accelerating in different rpm ranges.



If accelerated with steady throttle application, the changing of the load flaps can only be felt at about 2,500



rpm, and the Audi Valve Lift System shifts at about 3,800 rpm.



^ No DTCs in the engine control module.



^ Will not result in engine stall.



Technical Background



Incorrect software of the engine control module.



Production Solution



Optimized engine software from MY 2010.



Service



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



2. Update the engine control module using the SVM action code as listed in the table above if necessary.



Warranty



Required Parts and Tools



VAS Tester



485



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325



Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



533



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



534



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



535



536



537



538



539



540



541



Attachment - 00 Software Version Management (SVM), Operating Instructions

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325



Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



543



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325



Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



534



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



535



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



536



537



538



539



540



541



542



Attachment - 00 Software Version Management (SVM), Operating Instructions

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325



Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



510



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



511



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



512



513



514



515



516



517



518



Attachment - 00 Software Version Management (SVM), Operating Instructions

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325


Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571018 Date: 100325



Electrical - Accessory Electrical Outlets Are Inop.



90 All 12-volt accessory outlets are inoperative



57 10 18



2020795/6



March 25, 2010.



Supersedes Technical Service Bulletin Group 57 number 10-11 dated February 12, 2010 for reasons listed below.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 536



Affected Vehicles



Condition



^ All 12-volt accessory outlets are inoperative.



^ The cutoff stages from the Data Bus On Board Diagnostic Interface J533 are not active.



^ The sockets can be activated via the Output Diagnostic Test Mode (DTM).



Technical Background



Fault in the convenience system control module (J393) software.



Production Solution



Optimized convenience system control module (J393) software.



Service



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 537



2. Update the convenience system control module (J393) using the SVM action code as listed in the table above if necessary.



Tip: The software update provided by this SVM code resolves additional issues listed in the following bulletins:



^ 2019482 57 Remote function of vehicle keys inoperative



^ 2021341 96 Trunk light inoperative



^ 2021372 57 Button in rear lift gate for power closing does not function.



Warranty



Additional Information



The following Technical Service Bulletin will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating Instructions.



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 538



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 539



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 540



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 541



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 542



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 543



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 544



Attachment - 00 Software Version Management (SVM), Operating Instructions

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325



Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 545



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325



Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



519



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325


Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 571017 Date: 100325



Keyless Entry - Advanced Key(R) Won't Work On All Doors



57 Advanced key feature does not work for all doors



57 10 17



2023017/1



March 25, 2010



Affected Vehicles



542



Condition



^ Advanced key feature does not work for all doors.



^ The lock/unlock feature of the remote key functions properly, and the door lock can still be opened manually with the remote key blade.



^ DTC 03285, 03286, 00192, and/or 00193 (Outside door handle touch sensor short to ground or incorrect signal) may be stored in the Access and



Start Authorization Control Module J393 (address code 05).



Technical Background



Door handle electronics become inoperative.



Tip: If a DTC for any one of the outside door handle touch sensors is permanently entered into the Access and Start Authorization Control Module



J393, the advance key feature will not work for all the doors.



Production Solution



Improved door handle touch sensors.



Service



Using Guided Fault Finding, check the wiring of all door handle touch sensors for which a DTC has been logged in the Access and Star



Authorization Control Module J393 (address code 05).



If there are no problems with the wiring, replace the affected door handle touch sensor(s).



Warranty



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service