******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

410

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

411

412

413

414

415

416

417

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

367

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

368

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

369

370

371

372

373

374

375

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 408

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 409

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 410

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 411

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 412

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 413

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 414

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 415

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 611112 Date: 110223

Body - Water Leak At Front Corners Of Convertible Top

61 Water leak at front corners of convertible top

61 11 12

2024108/3

February 23, 2011.

Supersedes Technical Service Bulletin Group 61 number 10 - 10 dated November 23, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

Water leak from the convertible top.

TECHNICAL BACKGROUND

391

After heavy rain, water can migrate beyond the front convertible top header seal in the area where the convertible top header meets the windshield.

The leak may not be immediately noticeable but after a period of time following strong rainfall the leaks can become evident. The leaks specifically

manifest themselves in the front corners. See Figures 1 and 2.

PRODUCTION SOLUTION

A section of butyl cord is installed in the roof frame seal (header) to close the path of water migration.

SERVICE

1. Open the convertible top just enough to access the header area. In approximately 8 minutes the hydraulic pressure for the convertible top

operation is released.

Warning:

There is a risk of injury when the hydraulic pressure releases if caution is not exercised.

2. Make sure that the convertible top is in such a position that the working area can remain accessible.

3. Fold back the seal lip and loosen the bolts for the retaining strip (Figure 3).

392

4. Remove the bolts securing the retaining strip.

5. Lift the retaining strip and seal away from the top cover.

6. Install a section of butyl cord (AKL 450 005 05) between the seal and the top cloth across the front and into the corners. The section will be

approximately 135cm long. See illustration.

393

7. Install a length of cord long enough to wrap around and past the corners, and extend 40 mm past the roof line. Make sure that the butyl cord is

evenly spread between both edges in the outer groove of the seal. Kneading the cord may ease installation. Push any excess into the end chambers.

8. Press the seal on the cover and press firmly to ensure a good seal. Make sure the seal is correctly positioned on the cover.

9. Carefully reinstall the removed parts, paying particular attention to the correct installation of the seal on the retaining strip. An incorrectly

installed seal can create additional water leaks.

WARRANTY INFORMATION

394

REQUIRED PARTS AND TOOLS

ADDITIONAL INFORMATION

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

408

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

409

410

411

412

413

414

415

TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

410

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

411

412

413

414

415

416

417

TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 408

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 409

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 410

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 411

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 412

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 413

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 414

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 415

TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

367

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

368

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

369

370

371

372

373

374

375

TSB 2011732 00 Software Version Management (SVM), operating instructions.

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 611112 Date: 110223

Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 611112 Date: 110223

Body - Water Leak At Front Corners Of Convertible Top

61 Water leak at front corners of convertible top

61 11 12

2024108/3

February 23, 2011.

Supersedes Technical Service Bulletin Group 61 number 10 - 10 dated November 23, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

Water leak from the convertible top.

TECHNICAL BACKGROUND

391

After heavy rain, water can migrate beyond the front convertible top header seal in the area where the convertible top header meets the windshield.

The leak may not be immediately noticeable but after a period of time following strong rainfall the leaks can become evident. The leaks specifically

manifest themselves in the front corners. See Figures 1 and 2.

PRODUCTION SOLUTION

A section of butyl cord is installed in the roof frame seal (header) to close the path of water migration.

SERVICE

1. Open the convertible top just enough to access the header area. In approximately 8 minutes the hydraulic pressure for the convertible top

operation is released.

Warning:

There is a risk of injury when the hydraulic pressure releases if caution is not exercised.

2. Make sure that the convertible top is in such a position that the working area can remain accessible.

3. Fold back the seal lip and loosen the bolts for the retaining strip (Figure 3).

392

4. Remove the bolts securing the retaining strip.

5. Lift the retaining strip and seal away from the top cover.

6. Install a section of butyl cord (AKL 450 005 05) between the seal and the top cloth across the front and into the corners. The section will be

approximately 135cm long. See illustration.

393

7. Install a length of cord long enough to wrap around and past the corners, and extend 40 mm past the roof line. Make sure that the butyl cord is

evenly spread between both edges in the outer groove of the seal. Kneading the cord may ease installation. Push any excess into the end chambers.

8. Press the seal on the cover and press firmly to ensure a good seal. Make sure the seal is correctly positioned on the cover.

9. Carefully reinstall the removed parts, paying particular attention to the correct installation of the seal on the retaining strip. An incorrectly

installed seal can create additional water leaks.

WARRANTY INFORMATION

394

REQUIRED PARTS AND TOOLS

ADDITIONAL INFORMATION

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical Service Bulletin # 961117 Date: 110223

Audi Side Assist(R) - Control Unit Replacement

96 Audi Side Assist, replacing control units

96 11 17

2024300/2

February 23, 2011.

Supersedes Technical Service Bulletin Group 96 number 10 - 11 dated September 7, 2010 for reasons listed below.

AFFECTED VEHICLES

CONDITION

A control unit for the Audi Side Assist system (diagnosis address 3C) J769 or J770 has been replaced based on previous diagnosis.

TECHNICAL BACKGROUND

Due to the number of software and hardware versions of the control units, the latest version may not always be supplied by the Parts Department.

PRODUCTION SOLUTION

Not applicable.

SERVICE

1. To avoid repeat repairs, check the following list to determine if the master and slave control units are at the latest software level. Ensure that only

control units with a software version lower than those listed in the table are updated.

Note:

It is possible that higher versions can be flashed with old software during this update.

2. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

408

3. Update the Side Assist control units (J769 and J770) using the SVM action code as listed in the table above if necessary.

WARRANTY INFORMATION

ADDITIONAL INFORMATION

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

ATTACHMENTS

409

410

411

412

413

414

415

TSB 2011732 00 Software Version Management (SVM), operating instructions.