Collision Avoidance - Rearview Cam Control Unit Can't Be Coded
91 Replaced Rearview camera control unit cannot be coded
91 12 45
2030001/1
June 29, 2012.
Affected Vehicles
Condition
After replacing the original Rearview camera control unit, the replacement
control unit cannot be coded via SVM spec/actual. SVM returns a response code of "ERP0048I - Result: Hardware requiring checking was
detected!"
96
Technical Background
The Rearview camera control unit, for A4 and A5 vehicles, requires an SVM code to allow for the exchange and online coding using SVM. An SV
Specified vs. Actual comparison will not code the new control unit.
Production Solution
Not applicable.
Service
When replacing the Rearview camera control unit (J772) an SVM coding must be performed using the provided SVM code. This SVM code does
not provide any software updates to the control unit. It only allows the exchange of the original part to the replacement part along with the online
coding.
Warranty
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to
review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts department and service
manuals for the latest information.
