******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 961238 Date: 120613

Collision Avoidance - False Side Object Warning

96 Audi Side Assist warning light on with no objects in vehicle monitoring area (false warning)

96 12 38

2019481/8

June 13, 2012.

Supersedes Technical DIAGNOSIS AND REPAIR Group 96 number 11 - 16 dated January 6, 2011 for reasons listed below.

Affected Vehicles

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 119

Condition

^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the

monitored area to the sides of the vehicle.

^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).

Technical Background

Software fault.

Production Solution

Optimized software.

Service

Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be

debited.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in

the table above.

Tip: If the software is at the latest version and complaints of false warnings continue it is recommended to calibrate the sensors and verify they

are clean and properly mounted to the vehicle. If problems persist please contact the Audi Technical Assistance Center.

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 120

Warranty

Additional Information

The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

^ TSB 2020050 96 Lane change assistant (Audi side assist) inoperative

^ TSB 2024300 96 Audi Side Assist, replacing control units

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Attachment

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 121

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 122

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 123

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 124

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 125

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 126

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 127

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 128

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 129

Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 130

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 961238 Date: 120613

Collision Avoidance - False Side Object Warning

96 Audi Side Assist warning light on with no objects in vehicle monitoring area (false warning)

96 12 38

2019481/8

June 13, 2012.

Supersedes Technical DIAGNOSIS AND REPAIR Group 96 number 11 - 16 dated January 6, 2011 for reasons listed below.

Affected Vehicles

119

Condition

^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the

monitored area to the sides of the vehicle.

^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).

Technical Background

Software fault.

Production Solution

Optimized software.

Service

Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be

debited.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in

the table above.

Tip: If the software is at the latest version and complaints of false warnings continue it is recommended to calibrate the sensors and verify they

are clean and properly mounted to the vehicle. If problems persist please contact the Audi Technical Assistance Center.

120

Warranty

Additional Information

The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

^ TSB 2020050 96 Lane change assistant (Audi side assist) inoperative

^ TSB 2024300 96 Audi Side Assist, replacing control units

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Attachment

121

122

123

124

125

126

127

128

129

130

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A5 Cabriolet (8F7) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 961238 Date: 120613

Collision Avoidance - False Side Object Warning

96 Audi Side Assist warning light on with no objects in vehicle monitoring area (false warning)

96 12 38

2019481/8

June 13, 2012.

Supersedes Technical DIAGNOSIS AND REPAIR Group 96 number 11 - 16 dated January 6, 2011 for reasons listed below.

Affected Vehicles

111

Condition

^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the

monitored area to the sides of the vehicle.

^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).

Technical Background

Software fault.

Production Solution

Optimized software.

Service

Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be

debited.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in

the table above.

Tip: If the software is at the latest version and complaints of false warnings continue it is recommended to calibrate the sensors and verify they

are clean and properly mounted to the vehicle. If problems persist please contact the Audi Technical Assistance Center.

112

Warranty

Additional Information

The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

^ TSB 2020050 96 Lane change assistant (Audi side assist) inoperative

^ TSB 2024300 96 Audi Side Assist, replacing control units

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Attachment

113

114

115

116

117

118

119

120

121

122

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi S5 Quattro Coupe (8T3) V8-4.2L (CAUA) Technical DIAGNOSIS AND REPAIR # 961238 Date: 120613

Collision Avoidance - False Side Object Warning

96 Audi Side Assist warning light on with no objects in vehicle monitoring area (false warning)

96 12 38

2019481/8

June 13, 2012.

Supersedes Technical Service Bulletin Group 96 number 11 - 16 dated January 6, 2011 for reasons listed below.

Affected Vehicles

69

Condition

^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the

monitored area to the sides of the vehicle.

^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).

Technical Background

Software fault.

Production Solution

Optimized software.

Service

Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be

debited.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in

the table above.

Tip: If the software is at the latest version and complaints of false warnings continue it is recommended to calibrate the sensors and verify they

are clean and properly mounted to the vehicle. If problems persist please contact the Audi Technical Assistance Center.

70

Warranty

Additional Information

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

^ TSB 2020050 96 Lane change assistant (Audi side assist) inoperative

^ TSB 2024300 96 Audi Side Assist, replacing control units

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Attachment

71

72

73

74

75

76

77

78

79

80

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi A4 Quattro Wagon (8K5) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 961238 Date: 120613

Collision Avoidance - False Side Object Warning

96 Audi Side Assist warning light on with no objects in vehicle monitoring area (false warning)

96 12 38

2019481/8

June 13, 2012.

Supersedes Technical DIAGNOSIS AND REPAIR Group 96 number 11 - 16 dated January 6, 2011 for reasons listed below.

Affected Vehicles

119

Condition

^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the

monitored area to the sides of the vehicle.

^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).

Technical Background

Software fault.

Production Solution

Optimized software.

Service

Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be

debited.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in

the table above.

Tip: If the software is at the latest version and complaints of false warnings continue it is recommended to calibrate the sensors and verify they

are clean and properly mounted to the vehicle. If problems persist please contact the Audi Technical Assistance Center.

120

Warranty

Additional Information

The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

^ TSB 2020050 96 Lane change assistant (Audi side assist) inoperative

^ TSB 2024300 96 Audi Side Assist, replacing control units

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Attachment

121

122

123

124

125

126

127

128

129

130

TSB 2011732 00 Software Version Management (SVM), operating instructions.

******** Audi S5 Quattro Cabriolet (8F7) V6-3.0L SC (CCBA) Technical DIAGNOSIS AND REPAIR # 961238 Date: 120613

Collision Avoidance - False Side Object Warning

96 Audi Side Assist warning light on with no objects in vehicle monitoring area (false warning)

96 12 38

2019481/8

June 13, 2012.

Supersedes Technical Service Bulletin Group 96 number 11 - 16 dated January 6, 2011 for reasons listed below.

Affected Vehicles

84

Condition

^ False warning from lane change assistant (Audi Side Assist). The warning light in the side mirror(s) illuminate when no object is currently in the

monitored area to the sides of the vehicle.

^ No relevant DTC(s) stored in the lane change assistance control unit (address word 3C).

Technical Background

Software fault.

Production Solution

Optimized software.

Service

Replacement of the control unit is not necessary. Warranty claims for control unit replacements without use and application of this TSB will be

debited.

SVM Update Instructions

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Check the software version of the lane change assistant (address word 3C). Update the software as needed using the SVM action code listed in

the table above.

Tip: If the software is at the latest version and complaints of false warnings continue it is recommended to calibrate the sensors and verify they

are clean and properly mounted to the vehicle. If problems persist please contact the Audi Technical Assistance Center.

85

Warranty

Additional Information

The following Technical Service Bulletin will be necessary to complete this procedure:

^ TSB 2011732 00 Software Version Management (SVM), operating instructions.

^ TSB 2020050 96 Lane change assistant (Audi side assist) inoperative

^ TSB 2024300 96 Audi Side Assist, replacing control units

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service

manuals for the latest information.

Attachment

86

87

88

89

90

91

92

93

94

95

TSB 2011732 00 Software Version Management (SVM), operating instructions.