Instruments - Stripe Across Instrument Cluster Display
90 Stripe in IP cluster center display
90 10 22
2021309/3
December 1, 2010.
Supersedes Technical Service Bulletin Group 90 number 10-05 dated May 10, 2010 for reasons listed below.
Affected Vehicles
132
Condition
A stripe crosses the IP cluster center display.
This affects only vehicles with driver information system (PR number: +9Q2).
Technical Background
To differentiate the separate screen sections of the dash insert, a black plastic strip was installed in the upper third of the center screen. It prevents
interference of the background lighting with other sections. It also prevents mixing of light colors if information with yellow or red background
lighting is displayed.
Depending on the light situation and the illustrations or words displayed, the strip appears as a black stripe. It becomes very clear when performing a
final control diagnosis.
Production Solution
Not applicable.
Service
1. Do not replace the dash insert. Unjustified replaced parts will be debited.
2. Explain the Technical Background to the customer (possibly with a final control diagnosis).
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
