Memory System - Comfort Control Unit(BCM2)Can't Be Coded
57 Replaced Comfort System control unit (BCM2) cannot be coded
69 12 22
2024111/6
February 13, 2012.
Supersedes Technical Service Bulletin Group 69 number 11-21 dated December 14, 2011 for reasons listed below.
Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 261
Affected Vehicles
Condition
After replacing the Comfort System control unit (J393), the control unit cannot be coded via SVM spec/actual.
Technical Background
All new replacement Comfort System control units (J393) must be coded and parameterized using online SVM spec/actual or an SVM code. If the
SVM spec/actual returns a response of "Check Hardware", then the SVM code is required to code and parameterize the new replacement control
unit.
The SVM code can be found in Parts Bulletin 9-90. All parts bulletins are located on the ETKAinfo.com website. The link to ETKAinfo.com is
indicated by the icon seen in Figure 1.
Production Solution
Not applicable.
Service
When replacing the Comfort System control unit (J393), online coding and parameterization must first be attempted using an SVM spec/actual
comparison. If the SVM spec/actual returns a response of "Check Hardware", then it is possible one of the SVM codes listed below is required to
code and parameterize the new replacement control unit.
Tip: No main software update is performed during this SVM communication.
Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 262
^If the vehicle is a 2008/2009 model year A5/S5 with an original control unit part number of 8K0907289*, you are NO longer required to run the
8T46U002 and 8T46U003 SVM codes. The actions previously provided by these SVM codes have been incorporated into the SVM code
XCHG46A001.
Tip: 8K0907064A* indicates the part number could be 8K0907064AH, 8K0907064AS, etc., and 8K0907064C* indicates the part number could be
8K0907064CS, CQ, etc., and so forth. Due to the large amounts of possible variations, not all combinations are listed above.
Warranty Information
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to
review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
