Friday 8 February 2019

******** Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ) Technical DIAGNOSIS AND REPAIR # 011385 Date: 130411


Engine Controls - MIL ON, DTC P045600, No EVAP Leak



01 MIL on, no leak in EVAP system (DTC P045600 in ECM)



01 13 85



2027732/10



April 11, 2013



Supersedes Technical DIAGNOSIS AND REPAIR Group 01 number 13-84 dated April 3, 2013 for reasons listed below.



Vehicle Information



276



Condition



^ MIL on.



^ DTC P0456 (very small EVAP leak) stored in engine control module (ECM), J623 (01).



^ No leaks found in the EVAP system.



Technical Background



Software update needed.



Production Solution



New software in the ECM addressed the condition.



Service



Note:



Reference the Software Version Management (SVM) table below to determine the appropriate SVM update code. If the existing software is



already at the new version levels shown, and the natural vacuum leak diagnostic (NVLD) control module (A61A7: J909, A8: G400) has been



replaced with the latest part number, contact Audi Technical Assistance (TAC) for further instruction.



^ Follow all instructions in the attached TSB, 2011732 00 Software Version Management (SVM), operating instructions.



^ Update the ECM using the SVM action code as listed in the table below if necessary.



For A6 and A7:



1. If the software level is at 0004 or lower, perform ECM SVM update and replace crankcase pressure regulating valve with part number



06E103547H (only if SVM code 01A092 was used; the SVM code brings ECM to software level 0007, which needs the 'H' suffix breather



valve).



2. If P045600 is stored with software level 0005 (or higher), only replace NVLD control module, J909.



For A8:



1. If software is already to the latest level, replace G400. The SVM code 02A031 will update both the ECM and the TCM.



277



Warranty



Required Parts and Tools



Additional Information



The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:



278



279



280



281



282



283



284



285



286



287



^ TSB 2011732, 00 Software Version Management (SVM), operating instructions.



All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals



for the latest information.