ABS/TCS - Replaced ESP ABS Control Unit Can't Be Coded
45 Replaced ESP ABS control unit cannot be coded
45 10 02
2023655/1
June 8, 2010
Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 554
Affected Vehicles
Condition
After replacing the ESP ABS control unit, the control unit cannot be coded via SVM spec/actual.
Technical Background
A new generation of ESP ABS control unit (J104) was placed into production during the middle of the 2010 model year. This new generation
control unit must be coded and parameterized using an SVM code, which is listed in ETKA under the part number.
Production Solution
Not applicable.
Service
When replacing the ESP ABS control unit (J104), perform an SVM documentation feedback using an SVM code.
No software update is performed during this SVM communication.
Warranty
Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 555
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
