Saturday, 24 November 2018

******** Audi S5 Quattro Cabriolet (8F7) V6-3.0L SC (CCBA) Technical DIAGNOSIS AND REPAIR # 301216 Date: 121221


M/T - Clutch Pedal Makes Noises When Pressed



30 Clutch pedal makes noises when pressed



30 12 16



2032224/1



December 21, 2012.



Affected Vehicles



Condition



^ Clicking or knocking noise when pressing the clutch pedal.



^ Impulse noticeable when pressing the clutch pedal.



Technical Background



Excess clearance between mounting of clutch master cylinder and pedal assembly.



Production Solution



Not Applicable



365



Service



Replace mounting on clutch pedal and attach felt pieces on mounting to remove clearance.



1. Remove the mounting on the clutch pedal (Figure 3) according to the repair manual and discard.



2. From part number: 533 867 910 A cut two felt pieces 16mm long. (Figure 1)



3. On the short side cut into the felt pieces to approximately half the length (Figure 2)



4. While holding the mounting (part number: 1K0 721 357 A) closed, as shown in Figure 3, install felt strip onto both sides of mounting.



366



5. Install the felt a distance of 7 mm from tip on the depressed mounting on both sides. (Figure 4).



Tip: Figure 4 shows the relaxed condition of the mounting.



6. Install the mounting on the clutch pedal according to the repair manual.



Warranty



Required Parts and Tools



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



367



manuals for the latest information.