Showing posts with label M/T/R-tronic - Clutch Plate Diagnostic Guidelines. Show all posts
Showing posts with label M/T/R-tronic - Clutch Plate Diagnostic Guidelines. Show all posts

Sunday, 9 May 2021

******** Audi Q7 Quattro (4LB) V6-3.0L DSL Turbo (CATA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



178



^ The lining comes partly off because of overheating.



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



179



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Sunday, 10 January 2021

******** Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



127



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



128



^ The lining comes partly off because of overheating.



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



129



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Saturday, 15 August 2020

******** Audi S4 Quattro Sedan (8K2) V6-3.0L SC (CCBA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



85



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



86



^ The lining comes partly off because of overheating.



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



87



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Thursday, 5 December 2019

******** Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



295



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



296



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Saturday, 7 September 2019

******** Audi A6 Sedan (4F2) V6-3.2L (CALA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



98



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



99



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Sunday, 14 July 2019

******** Audi A8 Quattro Sedan (4E2) V8-4.2L (BVJ) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



129



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



130



^ The lining comes partly off because of overheating.



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



131



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Wednesday, 3 April 2019

******** Audi S5 Quattro Cabriolet (8F7) V6-3.0L SC (CCBA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



139



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



140



^ The lining comes partly off because of overheating.



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



141



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Thursday, 7 February 2019

******** Audi Q5 Quattro (8RB) V6-3.2L (CALB) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



252



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



253



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Monday, 4 February 2019

******** Audi TTS Quattro Roadster (8J9) L4-2.0L Turbo (CDMA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



72



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



73



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Wednesday, 12 December 2018

******** Audi A6 Quattro Sedan (4F2) V6-3.0L SC (CCAA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



242



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



243



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Saturday, 29 September 2018

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 295



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 296



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Wednesday, 25 April 2018

******** Audi S6 Quattro Sedan (4F2) V10-5.2L (BXA) Technical DIAGNOSIS AND REPAIR #301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



43



Affected Vehicles



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



44



^ The lining comes partly off because of overheating.



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



45



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Friday, 23 December 2016

******** Audi TTS Quattro Coupe (8J3) L4-2.0L Turbo (CDMA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



72



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



73



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Wednesday, 21 December 2016

******** Audi R8 Quattro Coupe (423) V10-5.2L (BUJ)Technical DIAGNOSIS AND REPAIR 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



93



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



94



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.

Tuesday, 15 November 2016

******** Audi TT Quattro Coupe (8J3) L4-2.0L Turbo (CCTA) Technical DIAGNOSIS AND REPAIR # 301110 Date: 111202


M/T/R-tronic - Clutch Plate Diagnostic Guidelines



30 Clutch plate diagnosis guidelines



30 11 10



2019850/4



December 2, 2011.



Supersedes Technical Service Bulletin Group 30 number 11 - 09 dated July 22, 2011 for reasons listed below.



Affected Vehicles



76



Condition



^ Clutch not operating properly.



^ Clutch smells burnt.



^ Clutch pedal does not fully return to starting position.



Technical Background



The following conditions can lead to clutch damage:



^ Incorrect shifting.



^ At a high vehicle speed, the clutch is pressed and an incorrect lower gear is selected. The gearbox drives the clutch plate past its designed RPM



range (over speed condition) and centrifugal force damages the clutch. If the clutch was engaged during this incorrect gear engagement, damage



would also occur to the engine.



^ The revolutions of clutch plate and engine input shaft differ too much.



^ Excessive slipping of the clutch.



This leads to the overheating of the clutch plate and removal of the lining.



Production Solution



Not Applicable.



Service



Try to reproduce the customer complaint so that it can be clearly assigned to this TSB.



Use the illustrations below to assess whether warranty damage is involved.



^ The lining comes partly off because of overheating.



77



^ The lining has burst off because of an over speed condition.



^ The lining is ground to the rivets; as a result, the clutch lining is broken.



Warranty



For all clutch damage shown in this TSB:



This damage is due to outside influence and is not covered by any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.