Showing posts with label Lighting. Show all posts
Showing posts with label Lighting. Show all posts

Saturday, 26 October 2019

Lighting - Moisture Accumulation In Exterior Lamps


94 Exterior lights, moisture accumulation



94 12 92



2012749/11



October 24, 2012.



Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011 for reasons listed below.



Affected Vehicles



Condition



Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake



light lens.



Technical Background



Damp air settles on the inside of a cold lens, which creates condensation.



The headlight circulation system allows air from the outside to flow through the headlights. This open water-protected ventilation system (needed for



pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively



cool areas, where the lens is cooled down by the air flow.



Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to



condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end,



with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture



does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.



Production Solution



Not applicable.



Service



For headlights, the affected lens surface should be clear after approximately 10 minutes of light operation, although the entire lens surface may not



clear. The clearing process depends on the outside temperature and the humidity.



In cases where water droplets have formed on the inside of the lens or water has collected at the bottom of the light assembly, check for leaking seals



and/or cracks in the lens or light assembly. If no damage is found, use compressed air (less than 30 PSI) to clear the lens.



On light assemblies with LED lights, e.g. S6 daytime running lights, the LED lights do not emit enough heat to clear the moisture from the lens. Only



the pressure difference of the ventilation system provides the air flow to clear the moisture on the inside of the lens. The design of the ventilation



system on these types of lights will ensure the lens is clear after a few miles have been driven.



For Audi Q7, please see TSB 2028277 94 Moisture accumulation in headlamps for the installation of headlight ventilation valves. Do not replace



2



light or lens assemblies for these conditions.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals



for the latest information.

Thursday, 17 October 2019

Lighting - LED Daytime Running Lamp Diagnostic Tips


94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side

Sunday, 25 August 2019

Lighting - LED Daytime Running Lamp Diagnostic Tips


94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side

Thursday, 22 August 2019

Lighting - LED Daytime Running Lamp Diagnostic Tips


94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 3

Friday, 31 May 2019

Lighting - Moisture Accumulation In Exterior Lamps


94 Exterior lights, moisture accumulation



94 12 92



2012749/11



October 24, 2012.



Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011 for reasons listed below.



Affected Vehicles



Condition



Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake



light lens.



Technical Background



Damp air settles on the inside of a cold lens, which creates condensation.



The headlight circulation system allows air from the outside to flow through the headlights. This open water-protected ventilation system (needed for



pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively



cool areas, where the lens is cooled down by the air flow.



Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to



condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end,



with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture



does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.



Production Solution



Not applicable.



Service



For headlights, the affected lens surface should be clear after approximately 10 minutes of light operation, although the entire lens surface may not



clear. The clearing process depends on the outside temperature and the humidity.



In cases where water droplets have formed on the inside of the lens or water has collected at the bottom of the light assembly, check for leaking seals



and/or cracks in the lens or light assembly. If no damage is found, use compressed air (less than 30 PSI) to clear the lens.



On light assemblies with LED lights, e.g. S6 daytime running lights, the LED lights do not emit enough heat to clear the moisture from the lens. Only



the pressure difference of the ventilation system provides the air flow to clear the moisture on the inside of the lens. The design of the ventilation



system on these types of lights will ensure the lens is clear after a few miles have been driven.



For Audi Q7, please see TSB 2028277 94 Moisture accumulation in headlamps for the installation of headlight ventilation valves. Do not replace



2



light or lens assemblies for these conditions.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals



for the latest information.

Wednesday, 15 May 2019

Lighting - Moisture Accumulation In Exterior Lamps


94 Exterior lights, moisture accumulation



94 12 92



2012749/11



October 24, 2012.



Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011 for reasons listed below.



Affected Vehicles



Condition



Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake



light lens.



Technical Background



Damp air settles on the inside of a cold lens, which creates condensation.



The headlight circulation system allows air from the outside to flow through the headlights. This open water-protected ventilation system (needed for



pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively



cool areas, where the lens is cooled down by the air flow.



Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to



condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end,



with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture



does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.



Production Solution



Not applicable.



Service



For headlights, the affected lens surface should be clear after approximately 10 minutes of light operation, although the entire lens surface may not



clear. The clearing process depends on the outside temperature and the humidity.



In cases where water droplets have formed on the inside of the lens or water has collected at the bottom of the light assembly, check for leaking seals



and/or cracks in the lens or light assembly. If no damage is found, use compressed air (less than 30 PSI) to clear the lens.



On light assemblies with LED lights, e.g. S6 daytime running lights, the LED lights do not emit enough heat to clear the moisture from the lens. Only



the pressure difference of the ventilation system provides the air flow to clear the moisture on the inside of the lens. The design of the ventilation



system on these types of lights will ensure the lens is clear after a few miles have been driven.



For Audi Q7, please see TSB 2028277 94 Moisture accumulation in headlamps for the installation of headlight ventilation valves. Do not replace



2



light or lens assemblies for these conditions.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals



for the latest information.

Wednesday, 13 March 2019

Lighting - LED Daytime Running Lamp Diagnostic Tips


94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side

Thursday, 30 August 2018

Lighting - LED Daytime Running Lamp Diagnostic Tips


Lighting - LED Daytime Running Lamp Diagnostic Tips



94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side

Lighting - LED Daytime Running Lamp Diagnostic Tips


Lighting - LED Daytime Running Lamp Diagnostic Tips



94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side

Lighting - LED Daytime Running Lamp Diagnostic Tips


Lighting - LED Daytime Running Lamp Diagnostic Tips



94 LED Daytime Running Light Diagnosis Tips



94 12 96



2027773/3



November 1, 2012.



Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012 for reasons listed below.



Affected Vehicles



Condition



Part or all of the daytime running lights do not work on vehicles with LED DRLs.



For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work.



Technical Background



In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated



control module. This TSB is for servicing information only.



Production Solution



Not Applicable.



Service



1. If a DTC is listed in J519 related to daytime running lights, follow the respective test plan before proceeding with this bulletin.



2. If both front DRLs are inoperative, verify the DRLs are turned on via the vehicle system option:



^ A3, TT, R8:



The daytime running lights are automatically switched on when the headlight switch is set to AUTO. If the headlight switch is set to OFF,



2



the DRLs will be off. This functionality cannot be changed.



^ A4 (8K), A5, A6, A7, A8, Audi Q7:



In vehicles with MMI, the daytime running lights are switched on via the menu option Exterior light control or Exterior Lighting.



See also the owner's manual of the respective vehicle types.



3. If one or several LEDs are not illuminated (Figure 1), the affected headlight assembly must be replaced. The LED light strip is not a



serviceable item.



Tip: Only the headlight assembly needs to be replaced. Any headlight control modules can be reused.



4. If all DRL LEDs in one headlight assembly are inoperative, there are typically two possible causes:



^ LED circuit board.



^ DRL control unit, located inside the headlight assembly.



Tip: For 2009 - 2010 Audi Q5 vehicles, please follow TSB 2020780, 94 One or more Daytime Running Light LEDs in one headlight



assembly are inoperative.



A3, A5 (2008-2012), and TT vehicles do not have serviceable DRL control units, as these modules are integrated into the headlight. On these



vehicles, the entire headlight assembly must be replaced.



For other vehicles, in order to verify the root cause, swap the DRL control units between the two headlights.



^ If the problem is no longer present, leave the control units on the currently installed side, and release the vehicle. Manufacturing



differences between components can sometimes lead to concerns that can be remedied simply by exchanging right and left control



modules.



^ If the problem follows the suspect DRL control unit, replace the DRL control unit.



^ If the problem does not follow and remains on the original side, verify all headlight connections, and replace the headlight with the



inoperative LED.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.



More diagnostic assistance on this system can be found in the following resources:



^ All Models: TSB 2023322, 94 Different color shades in LED daytime running lights



^ 2010 - 2011 Audi Q7: TSB 2022410, 94 Right daytime running light is inoperative in Coming Home mode (DTC 02746/007)



^ 2009 - 2010 A6: TSB 2023287, 94 LED daytime driving light inoperative on one side