Tuesday, 23 February 2021

******** Audi Q5 Quattro (8RB) V6-3.2L (CALB) Technical DIAGNOSIS AND REPAIR # 551108 Date: 110127


Campaign 55F6 - Tailgate Corrosion



RVU 55F6 - Servicing tailgate



55 11 08



2024422/2



January 27, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 55 number 10 - 05 dated October 14, 2010 for reasons listed below.



AFFECTED VEHICLES



380



CONDITION



This RVU has been proactively released to prevent the following condition from occurring in the vehicle:



On Audi Q5 vehicles built within a specific period, corrosion may occur on the guard plate underneath the tailgate.



This Required Vehicle Update (RVU) is in effect until August 3, 2012. After that date, this RVU will expire and no longer be in effect.



Vehicle must meet all of the following criteria:



^ Procedure is valid only for vehicles that show the 55F6 code in the ElsaWeb Campaign/Action Information screen on the day of repair.



^ Vehicle must be within the Limited New Vehicle Warranty.



^ Procedure must be performed within the allotted time frame stated in this Technical DIAGNOSIS AND REPAIR.



^ Procedure must be performed on applicable vehicles in dealer inventory prior to sale.



TECHNICAL BACKGROUND



Moisture can enter at the handle recess on the tailgate.



PRODUCTION SOLUTION



SERVICE



Tip: If corrosion is already present, perform corrosion repair and claim under warranty.



1. Remove tailgate trim (bottom). (See Repair Manual >> Body >> Body Interior >> 70 Interior Trim >> Removal and Installation >> Rear Lid



Trim).



2. Disconnect harnesses from handle.



3. Remove guard plate (Figure 1, B).



381



4. Remove nuts from handle (Figure 3, E).



5. Unclip handle pushbutton D (Figure 2, arrow).



6. Fit seal C onto handle pushbutton D.



7. Clip handle pushbutton D back in.



8. Bolt on new guard plate (Figure 1, B). Tighten bolts (Figure 1, A) only hand-tight at this stage.



9. Tighten nuts E (Figure 3, E).



Tightening torque: 6 Nm



10. Then tighten bolts (Figure 1, A).



Tightening torque: 6 Nm



Tip: The reversing camera (if installed) does not have to be adjusted.



11. Connect harnesses to handle.



12. Reinstall tailgate trim.



382



WARRANTY INFORMATION



383



REQUIRED PARTS AND TOOLS



^ Destroy and properly dispose of removed parts in accordance with local, state and federal/provincial environmental regulations.



^ If you have exhausted your allocated parts and you require additional parts for vehicles affected by this RVU but have exceeded your Upper Order



Limit, please submit your requests for additional parts via email. Be sure to include the affected VINs with your order. Prior to submitting your



request, ensure that each vehicle has the 55F6 code open in ElsaWeb. Your order will be reviewed and processed accordingly.



ADDITIONAL INFORMATION



All parts and service references provided in this RVU are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.