Sunday, 1 December 2019

******** Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Technical DIAGNOSIS AND REPAIR # 571160 Date: 111021


Keyless Systems - Key Memory Settings Are Not Available



57 Personalized memory settings of the key are not available



57 11 60



2019958/6



October 21, 2011.



Supersedes Technical DIAGNOSIS AND REPAIR Group 57 number 10 - 35 dated October 18, 2010 for reasons listed below.



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 318



Affected Vehicles



Condition



The customer may report that personalized memory settings (for example, electric exterior mirror, seat memory, radio, air conditioning, electric



steering wheel, etc.) are inoperative or incorrectly assigned when using the remote key.



Technical Background



The memory settings for each key are stored in the individual control unit (depending on the function) and not in the key itself.



Only the identification of the currently used remote key is transmitted on the CAN bus. Each participating control unit sets its own adjustments.



Production Solution



Not applicable.



Service



To rule out the key as the root cause, check whether the remote key is correctly identified by the vehicle.



Tip: Only keys on positions 1 to 4 are included in the personalized memory settings functions. Keys from position 5 cannot be personalized.



^ A3, TT, R8: Check MVB 10 in the convenience control unit (address word 46).



^ A4 (B7), A4 Cabriolet: Check MVB 7 in the convenience control unit (address word 46).



^ A4 (B8), A5, Audi Q5: Check MVB 10 in the control unit for access/start authorization (address word 05).



^ A6 (C6), Audi Q7: Check MVB 11 in the control unit for access/start authorization (address word 05).



^ A8 (D3): Check MVB 6 in the control unit for access/start authorization (address word 05).



^ A6 (C7), A8 (D4): Check MVB 10 in the control unit for access/start authorization (address word 05).



Audi A4 Quattro Sedan (8K2) L4-2.0L Turbo (CAEB) Page 319



If the identification of the key is correctly displayed, the key is operating to manufacturer specification.



The root cause for the condition must therefore be found in one of the participating control units.



Warranty



This TSB is informational only and not applicable to any Audi warranty.



Additional Information



All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service



manuals for the latest information.