Wednesday 6 November 2019

******** Audi A8 Quattro Sedan (4E2) V8-4.2L (BVJ) Technical DIAGNOSIS AND REPAIR # 481223 Date: 120424


Steering - Dynamic Steering Light ON/DTC's 02538/03221



48 Symbol for dynamic steering in cluster (DTC 02538 or 03221)



48 12 23



2026507/2



April 27, 2012.



Supersedes Technical DIAGNOSIS AND REPAIR Group 48 number 11 - 16 dated June 21, 2011 for reasons listed below.



Affected Vehicles



79



Condition



The symbol for dynamic steering is illuminated in the instrument cluster. A DTC for overload, overuse, or steering lock, is stored in the active



steering control module (J792), address word 1B. The environmental conditions displayed in the GFF log match the Technical Background below.



Technical Background



A DTC is stored when the dynamic steering lock does not actuate within the specified time. It may take too long to engage or disengage.



Production Solution



Modified software (SW 0580) and optimized dynamic steering lock magnet.



Service



1. Repair the steering column by installing the repair kit for lock magnet, part 8K0 927 289.



^ On an A4, A5, or Audi Q5 check the software level of the active steering module, address word 1B. Update the 1B module to software level



0580, if necessary, using the table below. If updating from a software level below 0570, the basic settings must be performed after the SVM



update.



80



^ On the A8 replace only the steering column lock magnet. An SVM update is not necessary on the A8.



SVM Update Instructions



1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.



2. Update the active steering control module (J792) using the SVM action code as listed in the table above if necessary.



Warranty



Required Parts and Tools



81



Additional Information



The following Technical DIAGNOSIS AND REPAIR will be necessary to complete this procedure:



^ TSB 2011732 00 Software Version Management (SVM), operating instructions.



All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Dept. and service manuals



for the latest information.



Attachment



82



83



84



85



86



87



88



89



90



^ TSB 2011732 00 Software Version Management (SVM), operating instructions.