Monday 6 November 2017

Audi Q7 Quattro Technical 571279 Date: 121001 Locks - Central Locking Locks When Ignition Key Removed 57 Vehicle locks as key is removed from ignition 57 12 79

 Audi Q7 Quattro Technical 571279 Date: 121001
Locks - Central Locking Locks When Ignition Key Removed
57 Vehicle locks as key is removed from ignition
57 12 79
2018737/6
October 26, 2012
Supersedes Technical Service Bulletin Group 57 number 10-32 dated September 9, 2010 for reasons listed below.
Affected Vehicles
Condition
Customer may complain that the vehicle locks itself when removing the key from the ignition lock.
Technical Background
When removing the ignition key from the ignition, the customer may unintentionally operate the lock button of the remote key.
With the S contact in the ignition lock off (key is removed), the central locking will resume to respond to signals from the remote key.
MVB 17 in electric control unit address $46 (Comfort System Central Control Module) can be used for argumentation. The last received central
locking command is stored in this MVB. A value of "2" indicates a locking command last sent from the remote key. With the Autolock feature,
MVB 17 is overwritten. Therefore MVB 17 must be read immediately after the complaint.
Production Solution
Not Applicable.
 Audi Q7 Quattro 6
Service
This condition is normal. Please explain operating concept to the customer.
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.