BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES
TECH TIPS - CANADA
Reference Number(s): CTT 01-14-03, Date of Issue: October 15, 2014
SERVICE INFORMATION
When performing any Software update, it is necessary to turn "OFF" the Bluetooth
connection and hard wire the dongle. It is possible that the update will fail if the
dongle is not hard wired. The affected module may require replacement as a consequence.
All update instructions require the dongle to be hardwired.
Here are the recommended Bluetooth disabling instructions for the 6150A, 6150B and the
6160A.
6150A;
Shutting off the Bluetooth on the 6150A is done by the switch behind the handle. This
will also shut off the Wi-Fi and you will need to hard wire the internet connection.
Once this is done start ODIS and perform the update.
AUDI: Audi Models
GROUP: 01 - On-Board Diagnostic
NOTE: Scan tools are defaulted to use Bluetooth connectivity. Plugging USB wire
between dongle and Scan tool alone will NOT disable Bluetooth connection.
2004 Audi A6 Quattro
BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES TECH TIPS - CANADA
2019年10月9日 22:4 42:249 Page 1 © 2011 Mitchell Repair Information Company, LLC.
6150B, 6160A;
On the and 6150B and 6160A go to the bottom right of the screen and click on the
Wireless Utility Icon then click on Bluetooth Power OFF. If the Dongle is hard wired it
may take a few seconds for the vehicle to connect to the scan tool. Once the connection
is re-established perform the software update.
2004 Audi A6 Quattro
BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES TECH TIPS - CANADA
2019年10月9日 22:42:24 Page 2 © 2011 Mitchell Repair Information Company, LLC.
2004 Audi A6 Quattro
BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES TECH TIPS - CANADA
2019年10月9日 22:42:25 Page 3 © 2011 Mitchell Repair Information Company, LLC.
TECH TIPS - CANADA
Reference Number(s): CTT 01-14-03, Date of Issue: October 15, 2014
SERVICE INFORMATION
When performing any Software update, it is necessary to turn "OFF" the Bluetooth
connection and hard wire the dongle. It is possible that the update will fail if the
dongle is not hard wired. The affected module may require replacement as a consequence.
All update instructions require the dongle to be hardwired.
Here are the recommended Bluetooth disabling instructions for the 6150A, 6150B and the
6160A.
6150A;
Shutting off the Bluetooth on the 6150A is done by the switch behind the handle. This
will also shut off the Wi-Fi and you will need to hard wire the internet connection.
Once this is done start ODIS and perform the update.
AUDI: Audi Models
GROUP: 01 - On-Board Diagnostic
NOTE: Scan tools are defaulted to use Bluetooth connectivity. Plugging USB wire
between dongle and Scan tool alone will NOT disable Bluetooth connection.
2004 Audi A6 Quattro
BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES TECH TIPS - CANADA
2019年10月9日 22:4 42:249 Page 1 © 2011 Mitchell Repair Information Company, LLC.
6150B, 6160A;
On the and 6150B and 6160A go to the bottom right of the screen and click on the
Wireless Utility Icon then click on Bluetooth Power OFF. If the Dongle is hard wired it
may take a few seconds for the vehicle to connect to the scan tool. Once the connection
is re-established perform the software update.
2004 Audi A6 Quattro
BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES TECH TIPS - CANADA
2019年10月9日 22:42:24 Page 2 © 2011 Mitchell Repair Information Company, LLC.
2004 Audi A6 Quattro
BLUETOOTH DISABLING WHILE PERFORMING MODULE UPDATES TECH TIPS - CANADA
2019年10月9日 22:42:25 Page 3 © 2011 Mitchell Repair Information Company, LLC.
