Technical Service Bulletin # 401227
Steering/Suspension - Wheel Bearing Clicking Noise
40 Clicking noise from wheel bearing
40 12 27
2024318/3
November 8, 2012.
Supersedes Technical Service Bulletin Group 40 number 12-26 dated September 26, 2012 for reasons listed below.
Date: 121108Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ)
Page 249
Affected Vehicles
Condition
Clicking or clacking noise when maneuvering or parking.
Technical Background
Normal driving dynamics may cause microscopic movements between the wheel bearing and wheel bearing housing.
Production Solution
Not applicable.
Service
1.
Remove any corrosion and dirt from the wheel bearing housing and the wheel bearing.2010 Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ)
Copyright ? 2013, ALLDATA
2.
Using a brush, apply a thin coat of paste G 052109A2 on the wheel
bearing housing as shown in Figure 1.
Make sure not to apply any paste on the threads.
Tip: Wheel bearings replaced for this concern will not be reimbursed under warranty.
10.52SS
Page 250Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ)
Page 251
Warranty
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and
service manuals for the latest information.
Steering/Suspension - Wheel Bearing Clicking Noise
40 Clicking noise from wheel bearing
40 12 27
2024318/3
November 8, 2012.
Supersedes Technical Service Bulletin Group 40 number 12-26 dated September 26, 2012 for reasons listed below.
Date: 121108Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ)
Page 249
Affected Vehicles
Condition
Clicking or clacking noise when maneuvering or parking.
Technical Background
Normal driving dynamics may cause microscopic movements between the wheel bearing and wheel bearing housing.
Production Solution
Not applicable.
Service
1.
Remove any corrosion and dirt from the wheel bearing housing and the wheel bearing.2010 Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ)
Copyright ? 2013, ALLDATA
2.
Using a brush, apply a thin coat of paste G 052109A2 on the wheel
bearing housing as shown in Figure 1.
Make sure not to apply any paste on the threads.
Tip: Wheel bearings replaced for this concern will not be reimbursed under warranty.
10.52SS
Page 250Audi A8L Quattro Sedan (4E8) V8-4.2L (BVJ)
Page 251
Warranty
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and
service manuals for the latest information.
