Audi Q5 Technical Service Bulletin # 571160 Date: 111021
Keyless Systems - Key Memory Settings Are Not Available
57 Personalized memory settings of the key are not available
57 11 60
2019958/6
October 21, 2011.
Supersedes Technical Service Bulletin Group 57 number 10 - 35 dated October 18, 2010 for reasons listed below.
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB) Page 281
Affected Vehicles
Condition
The customer may report that personalized memory settings (for example, electric exterior mirror, seat memory, radio, air conditioning, electric
steering wheel, etc.) are inoperative or incorrectly assigned when using the remote key.
Technical Background
The memory settings for each key are stored in the individual control unit (depending on the function) and not in the key itself.
Only the identification of the currently used remote key is transmitted on the CAN bus. Each participating control unit sets its own adjustments.
Production Solution
Not applicable.
Service
To rule out the key as the root cause, check whether the remote key is correctly identified by the vehicle.
Tip: Only keys on positions 1 to 4 are included in the personalized memory settings functions. Keys from position 5 cannot be personalized.
^ A3, TT, R8: Check MVB 10 in the convenience control unit (address word 46).
^ A4 (B7), A4 Cabriolet: Check MVB 7 in the convenience control unit (address word 46).
^ A4 (B8), A5, Audi Q5: Check MVB 10 in the control unit for access/start authorization (address word 05).
^ A6 (C6), Audi Q7: Check MVB 11 in the control unit for access/start authorization (address word 05).
^ A8 (D3): Check MVB 6 in the control unit for access/start authorization (address word 05).
^ A6 (C7), A8 (D4): Check MVB 10 in the control unit for access/start authorization (address word 05).
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB) Page 282
If the identification of the key is correctly displayed, the key is operating to manufacturer specification.
The root cause for the condition must therefore be found in one of the participating control units.
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
Keyless Systems - Key Memory Settings Are Not Available
57 Personalized memory settings of the key are not available
57 11 60
2019958/6
October 21, 2011.
Supersedes Technical Service Bulletin Group 57 number 10 - 35 dated October 18, 2010 for reasons listed below.
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB) Page 281
Affected Vehicles
Condition
The customer may report that personalized memory settings (for example, electric exterior mirror, seat memory, radio, air conditioning, electric
steering wheel, etc.) are inoperative or incorrectly assigned when using the remote key.
Technical Background
The memory settings for each key are stored in the individual control unit (depending on the function) and not in the key itself.
Only the identification of the currently used remote key is transmitted on the CAN bus. Each participating control unit sets its own adjustments.
Production Solution
Not applicable.
Service
To rule out the key as the root cause, check whether the remote key is correctly identified by the vehicle.
Tip: Only keys on positions 1 to 4 are included in the personalized memory settings functions. Keys from position 5 cannot be personalized.
^ A3, TT, R8: Check MVB 10 in the convenience control unit (address word 46).
^ A4 (B7), A4 Cabriolet: Check MVB 7 in the convenience control unit (address word 46).
^ A4 (B8), A5, Audi Q5: Check MVB 10 in the control unit for access/start authorization (address word 05).
^ A6 (C6), Audi Q7: Check MVB 11 in the control unit for access/start authorization (address word 05).
^ A8 (D3): Check MVB 6 in the control unit for access/start authorization (address word 05).
^ A6 (C7), A8 (D4): Check MVB 10 in the control unit for access/start authorization (address word 05).
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB) Page 282
If the identification of the key is correctly displayed, the key is operating to manufacturer specification.
The root cause for the condition must therefore be found in one of the participating control units.
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
