Audi Q5 Technical Service Bulletin # 241051 Date: 100929 Engine Controls - MIL ON/DTC P054C Set

 Audi Q5 Technical Service Bulletin # 241051 Date: 100929
Engine Controls - MIL ON/DTC P054C Set
01 - MIL on (DTC P054A and/or P054C)
24 10 51
2024219/1
September 29, 2010
AFFECTED VEHICLES
CONDITION
^ MIL on..
^ DTC P054A and/or P054C (Cold Start "B" Camshaft Position Timing Over-Advanced, Bank 1/2) are stored in ECM memory.
TECHNICAL BACKGROUND
Software update needed.
PRODUCTION SOLUTION
New software in the control module (J623) addressed the condition.
SERVICE
1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 626
2. Update the ECM using the SVM action code as listed in the table above if necessary.
WARRANTY
ADDITIONAL INFORMATION
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 627
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 628
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 629
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 630
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 631
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 632
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 633
2010 Audi Q5 Quattro (8RB) V6-3.2L (CALB)   Page 634
Attachment - 00 Software Version Management (SVM), operating instructions.