Audi A4 Quattro Sedan # 911190 Date: 110620
Audio System - No Audio From Any Sources
91 CAN radio with Bang and Olufsen sound system, no audio
91 11 90
2023281/2
June 20, 2011
Supersedes Technical Service Bulletin Group 91 number 10 - 13 dated April 23, 2010 for reasons listed below.
373
Affected Vehicles
Condition
^ The customer complaint is that there is no sound from all sources.
^ Only Concert/Symphony III CAN radios (PR 8UQ/8YN) with Bang and Olufsen Premium Sound system (PR 9VK) are affected.
^ In the Amplifier J525 (address word 47), DTC 00003 (Control Module Faulty) may be stored.
Technical Background
In certain rare circumstances (e.g. discharged vehicle battery, engine off, radio playing at high volume and/or bass levels, very cold weather) it is
possible for battery voltage at the amplifier to briefly drop below 9 Volts. When this occurs, the amplifier software temporarily switches the
amplifier off. If the condition occurs 3 times, DTC 00003 is stored and the amplifier is permanently switched off.
Production Solution
Optimized amplifier software.
Service
1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.
2. Update the amplifier J525 using the SVM action code as listed in the table above if necessary. This update will delete the DTC entry in the
amplifier and the sound will again be available. The new software prevents the DTC from setting due to low voltage conditions.
374
Warranty
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
^ TSB 2011732, 00 Software Version Management (SVM), operating Instructions.
^ TSB 2017729, 00 Electrical components malfunctioning after windows have been tinted.
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
Attachment
375
376
377
378
379
380
381
TSB 2011732, 00 Software Version Management (SVM), operating Instructions.
Audio System - No Audio From Any Sources
91 CAN radio with Bang and Olufsen sound system, no audio
91 11 90
2023281/2
June 20, 2011
Supersedes Technical Service Bulletin Group 91 number 10 - 13 dated April 23, 2010 for reasons listed below.
373
Affected Vehicles
Condition
^ The customer complaint is that there is no sound from all sources.
^ Only Concert/Symphony III CAN radios (PR 8UQ/8YN) with Bang and Olufsen Premium Sound system (PR 9VK) are affected.
^ In the Amplifier J525 (address word 47), DTC 00003 (Control Module Faulty) may be stored.
Technical Background
In certain rare circumstances (e.g. discharged vehicle battery, engine off, radio playing at high volume and/or bass levels, very cold weather) it is
possible for battery voltage at the amplifier to briefly drop below 9 Volts. When this occurs, the amplifier software temporarily switches the
amplifier off. If the condition occurs 3 times, DTC 00003 is stored and the amplifier is permanently switched off.
Production Solution
Optimized amplifier software.
Service
1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.
2. Update the amplifier J525 using the SVM action code as listed in the table above if necessary. This update will delete the DTC entry in the
amplifier and the sound will again be available. The new software prevents the DTC from setting due to low voltage conditions.
374
Warranty
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
^ TSB 2011732, 00 Software Version Management (SVM), operating Instructions.
^ TSB 2017729, 00 Electrical components malfunctioning after windows have been tinted.
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.
Attachment
375
376
377
378
379
380
381
TSB 2011732, 00 Software Version Management (SVM), operating Instructions.
